Atmega32 Archives - electroSome

Interfacing HC-SR04 Ultrasonic Distance Sensor with ATmega32 Microcontroller

Aman Deep — Fri, 16 Mar 2018 00:11:39 +0000

Introduction This project uses an ultrasonic sensor to indicate the distance of any object from it. Here we have made a setup based on a microcontroller in which real time distance is sensed by an ultrasonic sensor and displays measured distance on an LCD display. Required Components ATmega32 Microcontroller HC-SR04 Ultrasonic Distance Sensor 16×2 LCD […]

The post Interfacing HC-SR04 Ultrasonic Distance Sensor with ATmega32 Microcontroller appeared first on electroSome.

Interfacing Servo Motor with Atmega32 Microcontroller

Ligo George — Sun, 26 May 2013 13:56:29 +0000

Servo Motor is a DC Motor equipped with error sensing negative feedback to control the exact angular position of the shaft. Unlike DC Motors it will not rotate continuously. It is used to make angular rotations such as 0-90°, 0-180° etc. Stepper Motors can also be used for making precise angular rotations. But Servo Motors […]

The post Interfacing Servo Motor with Atmega32 Microcontroller appeared first on electroSome.

Interfacing DC Motor with Atmega32 Microcontroller

Ligo George — Fri, 24 May 2013 14:01:20 +0000

In some of your electronic projects you may want to control a DC Motor with Atmega32 Microcontroller. We can’t connect a DC Motor directly to a microcontroller due to following reasons. A microcontroller can’t supply the current required for the working of DC Motor. ATmega32 Microcontroller can source or sink currents up to 40mA but a DC Motor needs […]

The post Interfacing DC Motor with Atmega32 Microcontroller appeared first on electroSome.

Interfacing LCD with Atmega32 Microcontroller using Atmel Studio

Ligo George — Mon, 20 May 2013 15:56:13 +0000

As we all know LCD (Liquid Crystal Display) is an electronic display which is commonly used nowadays in applications such as calculators, laptops, tablets, mobile phones etc. 16×2 character LCD module is a very basic module which is commonly used by electronic hobbyists and is used in many electronic devices and project. It can display 2 lines […]

The post Interfacing LCD with Atmega32 Microcontroller using Atmel Studio appeared first on electroSome.

Using Push Button Switch with Atmega32 and Atmel Studio

Ligo George — Sun, 12 May 2013 20:13:59 +0000

This tutorial is meant for beginners in the field of Atmel AVR programming. I hope that you already read my first tutorial Blinking LED using Atmega32 and Atmel Studio. In most of the embedded electronic projects you may want to use a push button switch to give user inputs to the microcontroller. To use a […]

The post Using Push Button Switch with Atmega32 and Atmel Studio appeared first on electroSome.

Blinking LED using Atmega32 Microcontroller and Atmel Studio

Ligo George — Wed, 08 May 2013 12:32:34 +0000

Similar to printing ‘Hello World’ in C or C++, the very first step towards programming a microcontroller is Blinking a LED with a delay. Atmega32 is a very popular high performance 8 bit AVR Microcontroller. For this example project we need to use two registers DDR and PORT. DDR stands for Data Direction Register, it […]

The post Blinking LED using Atmega32 Microcontroller and Atmel Studio appeared first on electroSome.