Home › Forums › Microcontrollers › PIC Microcontroller › gsm with PIC controller
Tagged: pic16f877a, sim800
- This topic has 1 reply, 1 voice, and was last updated 5 years, 6 months ago by ykn.
-
AuthorPosts
-
August 28, 2017 at 3:06 pm #13903yknParticipant
hi all /
i have written code facing GSM with PIC controller . the code i written in Mikro c pro. i get the serial output but
could not retrieve the specific data which i want to display on lcd
please go through the code and correct where i am wrong
[code]
#define TRUE 1
#define bool_val_1 flags. f0
#define LCD_DIR TRISD
#define CTRL_DIR TRISB
#define LCD PORTD
#define RS PORTB.F0
#define E PORTB.F1
/////////////////////////////////////////////////////
#include”lcd.h”int flag=0,gps_flag=1;
int i=0;
int k;
char send_data();
char response[70]=””;void main()
{ CTRL_DIR=0X00;
LCD_DIR=0X00;
UART1_Init(2400); // Initialize UART module at 9600 bps
Delay_ms(1000);
/*Soft_UART_Init(&PORTD, 0, 1, 9600, 0);
delay_ms(500);*/
init_lcd() ;
delay_ms(500);
UART1_Write_Text(“ATE0\r\n”);
delay_ms(500);
UART1_Write_Text(“AT\r\n”);
delay_ms(500);while(gps_flag)
{
if(gps_flag)
{
send_data();
}
for(k=0;k++;k<70)
{
response[k]=”\0″;
}
}}
char send_data()
{
char flags;
char byte;
int k;
char num[10];
bool_val_1 = TRUE;UART1_Write_Text(“AT+CPBR=3\r\n”);
delay_ms(250);
//cmd_lcd(0x80);
//string_lcd(“AT+CGPSOUT=32”) ;
if(UART1_Data_Ready()>0)
{
byte=UART1_Read();
response[i]=byte;
delay_ms(1000);
//string_lcd(response[i]);
++i;}
delay_ms(1000);
if(bool_val_1)
{
//UART1_Write_Text(response) ;
cmd_lcd (0x01); // lcd clear command
delay_ms(5);
string_lcd(response);
delay_ms(1000);
//Soft_UART_Write(response);
for(K=4;k++;k>17)
{
num[k-4]=response[k] ;
}
}
i=0;
return ;
}/[code]
August 28, 2017 at 4:03 pm #13904yknParticipant#define TRUE 1 #define bool_val_1 flags. f0 #define LCD_DIR TRISD #define CTRL_DIR TRISB #define LCD PORTD #define RS PORTB.F0 #define E PORTB.F1 ///////////////////////////////////////////////////// #include"lcd.h" int flag=0,gps_flag=1; int i=0; int k; char send_data(); char response[70]=""; void main() { CTRL_DIR=0X00; LCD_DIR=0X00; UART1_Init(2400); // Initialize UART module at 9600 bps Delay_ms(1000); /*Soft_UART_Init(&PORTD, 0, 1, 9600, 0); delay_ms(500);*/ init_lcd() ; delay_ms(500); UART1_Write_Text("ATE0\r\n"); delay_ms(500); UART1_Write_Text("AT\r\n"); delay_ms(500); while(gps_flag) { if(gps_flag) { send_data(); } for(k=0;k++;k<70) { response[k]="\0"; } } } char send_data() { char flags; char byte; int k; char num[10]; bool_val_1 = TRUE; UART1_Write_Text("AT+CPBR=3\r\n"); delay_ms(250); cmd_lcd(0x80); string_lcd("AT+CPBR=3") ; while(UART1_Data_Ready()>0) { byte=UART1_Read(); response[i]=byte; delay_ms(1000); //string_lcd(response[i]); ++i; } delay_ms(1000); if(bool_val_1) { //UART1_Write_Text(response) ; cmd_lcd (0x01); // lcd clear command delay_ms(5); string_lcd(response); delay_ms(1000); //Soft_UART_Write(response); for(K=4;k++;k>17) { num[k-4]=response[k] ; } } //return ; }
-
AuthorPosts
- You must be logged in to reply to this topic.