- This topic has 5 replies, 2 voices, and was last updated 6 years, 5 months ago by
.
Viewing 6 posts - 1 through 6 (of 6 total)
-
Posts
-
Which is the compiler you are using for Atmel ?
Arduino has a separate compiler. You might need to manually convert the program.
I am using Arduino 1.6.10 , i think its latest version.
I have Atmel 8MHz code for cable tester and pin used are ADC0( PA0) to ADC7(PA7) as analog pin and PC0 to PC7 as digital pin.
If i want to use same program for Arduino mega 16Mhz with A8 to A15 analog pin and 42 to 49 ad Digital Pin.
My question is what i have to change to get it work on Arduino Mega.
Here is code:
#include <avr/io.h> #include <util/delay.h> #include <stdio.h> #include <stdlib.h> #include <stdbool.h> #include <math.h> #include <avr/pgmspace.h> #include "hd44780.h" // LCD #include "lan_tester.h" #define F_CPU 16000000UL //8 //---------------------------------------------------------------- float GetADCData (uchar nChannel) { ADCSRA = 0; _delay_us (5); ADMUX = 0b01000000 | (nChannel & 0b00000111); // 64, 7 _delay_us (5); ADCSRA = 0b10000101;//5 _delay_us (500); ADCSRA = 0b11000101; // 69 while ((ADCSRA & (1 << 6))); _delay_us (5); int nResult = ((int) ADCL) + (((int) ADCH) << 8); return (float) nResult; } //---------------------------------------------------------------- void SetTestLines (uchar nPositive, uchar nNegative, bool bWait) { DDRC = 0; PORTC = 0; if (nPositive != LINE_UNUSED) { DDRC |= (1 << nPositive); PORTC |= (1 << nPositive); } if (nNegative != LINE_UNUSED) { DDRC |= (1 << nNegative); } if (bWait) _delay_ms (20); return; } //---------------------------------------------------------------- void ShowFault (uchar nCode) { lcdClear (); static char strMessage11 [] PROGMEM = " On line "; static char strMessage12 [] PROGMEM = "There is tension!"; static char strMessage21 [] PROGMEM = "Replace the battery"; static char strMessage31 [] PROGMEM = " ADC faulty "; switch (nCode) { case 0: lcdGotoXY (1, 0); lcdPutsFromFlash (strMessage11); lcdGotoXY (2, 0); lcdPutsFromFlash (strMessage12); break; case 1: lcdGotoXY (1, 0); lcdPutsFromFlash (strMessage21); break; case 2: lcdGotoXY (1, 0); lcdPutsFromFlash (strMessage31); break; } return; } //---------------------------------------------------------------- bool CheckLineVoltage (float *Umin, float *Umax) { bool bFlag = false; SetTestLines (LINE_UNUSED, LINE_UNUSED, true); for (int i = 0; i < 8; i++) { if (GetADCData (i) > fZero) bFlag = true; } if (bFlag) { ShowFault (0); return false; } if (!PINB2) { ShowFault (1); return false; } SetTestLines (LINE_UNUSED, 0, true); *Umin = GetADCData (0); SetTestLines (0, LINE_UNUSED, true); *Umax = GetADCData (0); if ((*Umax - *Umin) < 700) { ShowFault (2); return false; } return true; } //---------------------------------------------------------------- bool CheckConnection (char *Data, char *Mask) { for (uchar i = 0; i < 8; i++) { if ((Data [i] != Mask [i]) && (Mask [i] != 'X')) return false; } return true; } //---------------------------------------------------------------- void RefreshDisplay (uchar *Data, int L, bool bShowLength) { char str [9]; static char strMessage0 [] PROGMEM = "Main: 12345678"; static char strMessage1 [] PROGMEM = "1Gb LAN Staight "; static char strMessage2 [] PROGMEM = "1Gb LAN Cross "; static char strMessage3 [] PROGMEM = "100Mb LAN Straight"; static char strMessage4 [] PROGMEM = "100Mb LAN Cross "; static char strMessage5 [] PROGMEM = "E1/T1 "; static char strMessage6 [] PROGMEM = "No connection "; static char strMessage7 [] PROGMEM = " "; lcdGotoXY (0, 0); lcdPutsFromFlash (strMessage0); lcdGotoXY (1, 0); lcdPutsFromRAM ("Remote: "); for (int i = 0; i < 8; i++) { switch (Data [i]) { case 1: case 2: case 3: case 4: case 5: case 6: case 7: case 8: str [i] = Data [i] + 48; break; case LINE_UNKNOWN: str [i] = '?'; break; case LINE_SHORTED: str [i] = 'S'; break; case LINE_BROKEN: str [i] = 'X'; break; default: str [i] = ' '; } } str [8] = 0; lcdPutsFromRAM (str); lcdPutsFromRAM (" "); lcdGotoXY (2, 0); if (bShowLength) { if (L < 5) { lcdPutsFromRAM ("Cable Length <5 м "); } else { lcdPutsFromRAM ("Cable Length "); itoa (L, str, 10); lcdPutsFromRAM (str); lcdPutsFromRAM (" M "); } } else { lcdPutsFromFlash (strMessage7); } lcdGotoXY (3, 0); if (CheckConnection (str, "12345678")) lcdPutsFromFlash (strMessage1); else if (CheckConnection (str, "36145278")) lcdPutsFromFlash (strMessage2); else if (CheckConnection (str, "123XX6XX")) lcdPutsFromFlash (strMessage3); else if (CheckConnection (str, "361XX2XX")) lcdPutsFromFlash (strMessage4); else if (CheckConnection (str, "45X12XXX")) lcdPutsFromFlash (strMessage5); else lcdPutsFromFlash (strMessage6); return; } //---------------------------------------------------------------- void Initialize () { DDRA = 0; DDRB = 0; DDRC = 0; DDRD = 0; PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; MCUCSR = 0b10000000; TCCR1A = 0; TCCR1B = 0; _delay_ms (100); lcdInit(); return; } //---------------------------------------------------------------- float GetResistance (uchar Line1, uchar Line2, float Umin) { SetTestLines (Line1, Line2, true); float U1 = GetADCData (Line1); float U2 = GetADCData (Line2); float Ra = R1 * R2 / (R1 + R2); if ((U2 - Umin) <= 0) return 1e6; return (U1 - U2) * Ra / (U2 - Umin); } //---------------------------------------------------------------- uchar StageOneCheck (uchar *Line, const uchar *PinOut, uchar *GoodLine, uchar *BrokenIndex) { uchar LineCount = 0; *BrokenIndex = LINE_UNUSED; for (uchar i = 0; i < 8; i++) { Line [i] = 0; SetTestLines (PinOut [i], LINE_UNUSED, true); bool bFlag = false; for (uchar j = 0; j < 8; j++) { float fADCData = GetADCData (PinOut [j]); if ((fADCData > fMaxValue) && (i != j)) Line [i] = LINE_SHORTED; if ((fADCData > fZero) && (i != j)) bFlag = true; } if (!bFlag) { Line [i] = LINE_BROKEN; *BrokenIndex = i; } if (Line [i] == 0) GoodLine [LineCount++] = i; } return LineCount; } //---------------------------------------------------------------- void StageTwoCheck (uchar *Line, const uchar *PinOut, uchar *GoodLine, uchar LineCount, const float R [3][8], float Umin) { volatile static float fRcalc [8]; uchar i = 0, j = 0; uchar nMinIndex [3] = {0, 0, 0}; float fMinResistance = 1e6; float Rtmp; // find two lines with minimal resistance for (i = 1; i < LineCount; i++) { for (j = 0; j < i; j++) { Rtmp = GetResistance (PinOut [GoodLine [i]], PinOut [GoodLine [j]], Umin); if (Rtmp < fMinResistance) { fMinResistance = Rtmp; nMinIndex [0] = i; nMinIndex [1] = j; } } } // find third line fMinResistance = 1e6; for (i = 0; i < LineCount; i++) { if ((i != nMinIndex [0]) && (i != nMinIndex [1])) { Rtmp = GetResistance (PinOut [GoodLine [nMinIndex [0]]], PinOut [GoodLine [i]], Umin); if (Rtmp < fMinResistance) { fMinResistance = Rtmp; nMinIndex [2] = i; } } } // solve equations float fR12 = GetResistance (PinOut [GoodLine [nMinIndex [0]]], PinOut [GoodLine [nMinIndex [1]]], Umin); float fR13 = GetResistance (PinOut [GoodLine [nMinIndex [0]]], PinOut [GoodLine [nMinIndex [2]]], Umin); float fR23 = GetResistance (PinOut [GoodLine [nMinIndex [1]]], PinOut [GoodLine [nMinIndex [2]]], Umin); float fR1 = 0.5 * (fR12 + fR13 - fR23); float fR2 = fR12 - fR1; uchar idxMin; if (fR1 < fR2) { idxMin = nMinIndex [0]; fRcalc [idxMin] = fR1; } else { idxMin = nMinIndex [1]; fRcalc [idxMin] = fR2; } for (i = 0; i < LineCount; i++) { if (i != idxMin) { Rtmp = GetResistance (PinOut [GoodLine [i]], PinOut [GoodLine [idxMin]], Umin); fRcalc [i] = Rtmp - fRcalc [idxMin]; } } // try to found according resistance in table for (i = 0; i <= LineCount; i++) { for (j = 0; j < 8; j++) { if ((R [1][j] < fRcalc [i]) && (fRcalc [i] < R [2][j])) { Line [GoodLine [i]] = j + 1; break; } } if (Line [GoodLine [i]] == 0) Line [GoodLine [i]] = LINE_UNKNOWN; } return; } //---------------------------------------------------------------- int StageThreeCheck (uchar BrokenIndex, const uchar *PinOut) { SetTestLines (PinOut [BrokenIndex], LINE_UNUSED, true); float U1 = GetADCData (PinOut [BrokenIndex]); TCNT1H = 0; TCNT1L = 0; TCCR1B = 1; SetTestLines (LINE_UNUSED, LINE_UNUSED, false); _delay_ms (1); float U2 = GetADCData (PinOut [BrokenIndex]); TCCR1B = 0; int nTime = ((int) TCNT1L) + (((int) TCNT1H) << 8); float fTime = ((float) nTime) * 1000 / F_CPU; float L = (-fTime/log (U2 / U1) - 1.71) / 0.032; return (int) L; } //---------------------------------------------------------------- void EasterEgg () { static int i = 0; static char strMessage1 [] PROGMEM = " "; static char strMessage2 [] PROGMEM = "LAN-Tester v 1.1"; static char strMessage3 [] PROGMEM = " "; static char strMessage4 [] PROGMEM = " "; if (++i == 120) { lcdClear (); lcdGotoXY (0, 0); lcdPutsFromFlash (strMessage1); lcdGotoXY (1, 0); lcdPutsFromFlash (strMessage2); lcdGotoXY (2, 0); lcdPutsFromFlash (strMessage3); lcdGotoXY (3, 0); lcdPutsFromFlash (strMessage4); _delay_ms (5000); lcdClear (); } return; } //---------------------------------------------------------------- int main() { const uchar PinOut [8] = {6, 5, 7, 4, 0, 3, 1, 2}; const float R [3][8] = {{15, 8.2, 51, 3.0, 5.1, 2.0, 22, 1.0}, {13, 7.5, 40, 2.5, 4.0, 1.5, 18, 0.7}, {18, 9.5, 60, 3.8, 6.5, 2.5, 27, 1.5}}; float Umax, Umin; int L = 0; uchar Line [8]; uchar GoodLine [8]; uchar BrokenIndex; uchar Step = 0; uchar LineCount = 0; uchar i; Initialize (); while (1) { switch (Step) { case 0: // startup checks if (CheckLineVoltage (&Umin, &Umax)) Step = 1; break; case 1: // try to found unbroken line, check for shortage LineCount = StageOneCheck (Line, PinOut, GoodLine, &BrokenIndex); if (LineCount < 3) { for (i = 0; i < 8; i++) { if (Line [i] == 0) Line [i] = LINE_UNKNOWN; } Step = 3; } else { Step = 2; } break; case 2: // resistance measure, lines order check StageTwoCheck (Line, PinOut, GoodLine, LineCount, R, Umin); if (BrokenIndex == LINE_UNUSED) Step = 4; else Step = 3; break; case 3: // capacitance measure, if there are broken lines L = StageThreeCheck (BrokenIndex, PinOut); Step = 4; break; case 4: // display refresh RefreshDisplay (Line, L, (BrokenIndex != LINE_UNUSED)); EasterEgg (); default: Step = 0; } } }Your code seems to be based on Atmel Studio, so you need to manually convert the entire code for Arduino.
Viewing 6 posts - 1 through 6 (of 6 total)
- You must be logged in to reply to this topic.