Tag - Proteus

Stepper Motor or Step Motor

Interfacing Stepper Motor with 8051 using Keil C – AT89C51

Stepper Motor A Stepper Motor is a brushless, synchronous DC Motor. It has many applications in the field of robotics and mechatronics. The total rotation of the motor is divided into steps. The angle of a single step is known as the stepper angle of the motor. There are two types of stepper motors Unipolar and Bipolar. Due to the ease of operation unipolar stepper motor is commonly used by electronics hobbyists. For more details please read the article Stepper Motor or Step Motor. Stepper...

May 17, 2013By 8051 Microcontroller, Tutorials, , , , 12 CommentsRead more...
Push Button Switch

Using Push Button Switch with Atmega32 and Atmel Studio

Push Button Switch This tutorial is meant for beginners in the field of Atmel AVR programming. I hope that you already read my first tutorial Blinking LED using Atmega32 and Atmel Studio. In most of the embedded electronic projects you may want to use a push button switch to give user inputs to the microcontroller. To use a push button switch with a microcontroller, first you should configure the corresponding pin as input. Then we can easily read the status of...

May 13, 2013By ATMEL AVR, Tutorials, , , , , , 36 CommentsRead more...
dc motor

Interfacing DC Motor with 8051 using L293D – AT89C51

In some of the electronics projects you may want to control a DC Motor with 8051 microcontroller. The maximum current that can be sourced or sunk from a 8051 microcontroller is 15 mA at 5v. But a DC Motor need currents very much more than that and it need voltages 6v, 12v, 24v etc, depending upon the type of motor used. Another problem is that the back emf produced by the motor may affect the proper functioning of the microcontroller. Due to these reasons we...

May 13, 2013By 8051 Microcontroller, Tutorials, , , , , , 36 CommentsRead more...
16x2 Character LCD

Interfacing LCD with 8051 using Keil C – AT89C51

Liquid Crystal Display (LCD) is very commonly used electronic display module and having a wide range of applications such as calculators, laptops, mobile phones etc. 16x2 character lcd display is very basic module which is commonly used in electronics devices and projects. It can display 2 lines of 16 characters. Each character is displayed using 5x7 or 5x10 pixel matrix. 16x2 Character LCD Interfacing 16x2 LCD with 8051 using Keil C is bit complex because there is no powerful libraries in Keil...

May 10, 2013By 8051 Microcontroller, Tutorials, , , , , 131 CommentsRead more...
relay

Interfacing Relay with 8051 using Keil C – AT89C51

In some electronic applications we need to switch or control high voltages or high currents. In these cases we may use electromagnetic or solid state relays. For example, it can be used to control home appliances using low power electronic circuits. relay An electromagnetic relay is a switch which is used to switch High Voltage or Current using Low power circuits. It magnetically isolates low power circuits from high power circuits. It is activated by energizing a electromagnet, coil wounded on a soft iron core. For detailed...

May 10, 2013By 8051 Microcontroller, Tutorials, , , 14 CommentsRead more...

Blinking LED using Atmega32 Microcontroller and Atmel Studio

Similar to printing 'Hello World' in C or C++, the very first step towards programming a microcontroller is Blinking a LED with a delay. Atmega32 is a very popular high performance 8 bit AVR Microcontroller. For this example project we need to use two registers DDR and PORT. DDR stands for Data Direction Register, it determines the direction (Input/Output) of each pins on the microcontroller. HIGH at DDR register makes corresponding pin Output while LOW at DDR register makes corresponding...

May 8, 2013By ATMEL AVR, Tutorials, , , , , 18 CommentsRead more...
proteus

Getting Started with Proteus – Beginners Tutorial

Proteus is a design software developed by Labcenter Electronics for electronic circuit simulation, schematic capture and PCB design. Its simplicity and user friendly design made it popular among electronics hobbyists. Proteus is commonly used for digital simulations such as microcontrollers and microprocessors. It can simulate LED, LDR, USB Communication ... You can buy Proteus from Labcenter Electronics. Switching LED using Push Button Switch First we can start with very primitive circuit for switching an LED using a Push Button Switch. https://www.youtube.com/watch?v=JXtrn1NU1nU Steps : Open Proteus ISIS...

May 4, 2013By Electronics, Tutorials6 CommentsRead more...
AT89C51

LED Blinking using 8051 Microcontroller and Keil C – AT89C51

8051 Microcontroller is a programmable device which is used for controlling purpose. Basically 8051 controller is Mask programmable means it will programmed at the time of manufacturing and will not programmed again, there is a derivative of 8051 microcontroller, 89c51 micro controller which is re-programmable. AT89C51 89c51 is 8-bit device means it is capable of doing 8-bit operations.  It have 4 ports which are used as input or output according to your need. This device also have Timer, Serial Port interface and Interrupt controlling you can use these according to your need. The datasheet may be downloaded from...

May 4, 2013By 8051 Microcontroller, Electronics, Tutorials, , , 38 CommentsRead more...
>