Tag - Microcontroller

Blinking LED using Atmega32 Microcontroller and Atmel Studio

Similar to printing 'Hello World' in C or C++, the very first step towards programming a microcontroller is Blinking a LED with a delay. Atmega32 is a very popular high performance 8 bit AVR Microcontroller. For this example project we need to use two registers DDR and PORT. DDR stands for Data Direction Register, it determines the direction (Input/Output) of each pins on the microcontroller. HIGH at DDR register makes corresponding pin Output while LOW at DDR register makes corresponding...

May 8, 2013By ATMEL AVR, Tutorials, , , , , 18 CommentsRead more...
Push Button Switch

Using Push Button Switch with 8051 and Keil C – AT89C51

This tutorial is for beginners in the field of microcontroller. In this case the microcontroller is AT89C51, a reprogrammable derivative of 8051. This purpose of this tutorial is to familiarize with the use of push button switch with the microcontroller. It will be useful whenever a decision is to be made according to the press of a switch. If you are not yet started with 8051 with Keil C please refer this tutorial Blinking Led using 8051 and Keil C. Circuit Diagram LED and Switch Interfacing with AT89C51...

May 6, 2013By 8051 Microcontroller, Electronics, Tutorials, , , , , 33 CommentsRead more...
AT89C51

LED Blinking using 8051 Microcontroller and Keil C – AT89C51

8051 Microcontroller is a programmable device which is used for controlling purpose. Basically 8051 controller is Mask programmable means it will programmed at the time of manufacturing and will not programmed again, there is a derivative of 8051 microcontroller, 89c51 micro controller which is re-programmable. AT89C51 89c51 is 8-bit device means it is capable of doing 8-bit operations.  It have 4 ports which are used as input or output according to your need. This device also have Timer, Serial Port interface and Interrupt controlling you can use these according to your need. The datasheet may be downloaded from...

May 4, 2013By 8051 Microcontroller, Electronics, Tutorials, , , 38 CommentsRead more...
GLCD

Interfacing GLCD with PIC Microcontroller

I have already posted about Interfacing character LCD with PIC Microcontrollers. By using GLCD (Graphical LCD) we can present information in a better and user friendly way by using any patterns or shapes. Graphical LCDs are preferred where both character and graphical representation are required. Compared to Character LCD, GLCD is a bit complex and we need a powerful graphic library. MikroC PRO for PIC Microcontrollers provides powerful built in libraries for that. GLCD  MikroC Pro - Graphic LCD Library MikroC Pro for PIC Microcontrollers...

May 1, 2013By MikroC, PIC Microcontroller, Tutorials, , , , , , 16 CommentsRead more...
Ultrasonic Distance Sensor

Interfacing Ultrasonic Distance Sensor : ASCII Output with PIC Microcontroller

In some of our projects, we may want to measure the distance of an object from a point. Ultrasonic Distance Sensors are the best sensor which provides stable, accurate, precise, non-contact distance measurements from 2cm to 4m. Ultrasonic Sensors can be used to measure distance between moving or stationary objects. Being very accurate and stable, these devices find large number of applications in robotics fields. For example it can be used as an excellent replacement for IR sensors in  a Micromouse. In...

March 7, 2013By Embedded, MikroC, PIC Microcontroller, PIC Microcontroller, Projects, Tutorials, , , , 92 CommentsRead more...
relay

Interfacing Relay with PIC Microcontroller

A relay is an electromagnetic switch which is used to switch High Voltage/Current using Low power circuits. Relay isolates low power circuits from high power circuits. It is activated by energizing a coil wounded on a soft iron core. For detailed working of relay please visit this page. A relay should not be directly connected to a microcontroller, it needs a driving circuit. A relay should not be connected directly to a microcontroller due to following reasons.. A microcontroller is not able...

March 2, 2013By MikroC, PIC Microcontroller, Tutorials, , , , 42 CommentsRead more...
dc motor

DC Motor Speed Control using PWM with PIC Microcontroller

I already posted about Interfacing DC Motor with PIC Microcontroller. In our robotics applications we may have to control the speed of the DC Motor. In this tutorial we will see how to control the speed of a DC Motor using Pulse Width Modulation (PWM). By using PWM we can easily control the average power delivered to a load and by thus we can easily control the speed of the DC Motor. You may think that a variable resistor in series...

January 26, 2013By MikroC, PIC Microcontroller, Tutorials, , , 143 CommentsRead more...
PIC16F877A

Generating PWM with PIC Microcontroller using CCP Module

PWM is a technique used to generate analog output signal using digital signals. It is commonly used to control average power delivered to a load, motor speed control, generating analog voltage levels and for generating analog waveforms. CCP Modules are available with a number of PIC Microcontrollers. CCP stands for Capture/Compare/PWM. Using PWM module is far more easier and cost effective than using extra chips for PWM generation.  MikroC Pro for PIC Microcontroller provide built-in library for PWM which makes our...

January 19, 2013By MikroC, PIC Microcontroller, Tutorials, , , , 114 CommentsRead more...
>