PIC Archives - Page 7 of 8

Interfacing DC Motor with PIC Microcontroller using L293D

This tutorial explains " How to interface DC Motor with PIC Microcontroller ? ". DC Motor and L293D We can't drive a DC Motor (depends) directly with a Microcontroller, as DC Motors requires high current and high voltage than a Microcontroller can handle. Microcontrollers usually operates at +5 or +3.3V supply and it I/O pin can provide only up to 25mA current. Commonly used DC Motors requires 12V supply and 300mA current, moreover interfacing DC Motors directly with Microcontrollers may affect the...

June 5, 2012By Ligo GeorgeMikroC, PIC Microcontroller, TutorialsDC Motor, L293D, Microcontroller, PIC141 CommentsRead more...

Digital Thermometer using PIC Microcontroller and LM35 Temperature Sensor

Basics A Digital Thermometer can be easily constructed using a PIC Microcontroller and LM35 Temperature Sensor. LM35 series is a low cost and precision Integrated Circuit Temperature Sensor whose output voltage is proportional to Centigrade temperature scale. Thus LM35 has an advantage over other temperature sensors calibrated in Kelvin as the users don't require subtraction of large constant voltage to obtain the required Centigrade temperature. It doesn't requires any external calibration. It is produced by National Semiconductor and can operate over a -55 °C to 150 °C...

June 1, 2012By Ligo GeorgeEmbedded, PIC Microcontroller, ProjectsLM35, Microcontroller, PIC, Projects, Thermometer116 CommentsRead more...

Digital Clock using PIC Microcontroller and DS1307 RTC

A Digital Clock can be made easily by using PIC Microcontroller, DS1307 and a 16x2 LCD. I have already posted about Interfacing DS1307 RTC with PIC Microcontroller. The DS1307 RTC can work either in 24-hour mode or 12-hour mode with AM/PM indicator. It automatically adjusts for months fewer than 31 days including leap year compensation up to year 2100. DS1307 comes with built-in power sensing circuit which senses power failures and automatically switches to back up supply. We can provide a 3V CMOS...

May 31, 2012By Ligo GeorgeEmbedded, PIC Microcontroller, ProjectsClock, Digital, DS1307, Embedded, Microcontroller, PIC, RTC324 CommentsRead more...

Multiplexing of Seven Segment Displays with PIC Microcontroller

When a Seven Segment Display is interface with PIC Microcontroller it needs minimum 7 pins to display a value. But real time applications like Digital Clock, Calculator, Digital Watch requires 3-6 seven segment displays. Lets assume that we need 6 digit display, ie we need 7 segment * 6 Display = 42 pins. Thus we actually need Microcontroller with 42 output pins. This is waste and not economical to use lot of pins of a Microcontroller just for display. The simplest way...

May 23, 2012By Ligo GeorgeMikroC, PIC Microcontroller, TutorialsDisplay, Microcontroller, MikroC, PIC, Proteus, Seven Segment24 CommentsRead more...

Voltmeter and Ammeter using PIC Microcontroller

Voltmeter and Ammeter can be easily made using PIC Microcontroller having ADC (Analog to Digital Converter). I am using PIC16F877A and the result is displayed on an LCD Display. PIC16F877A is enough if you do this project only for testing purposes. I suggest to use PIC with low pin numbers and multiplexed 7 segment display if you wish to use this as your measuring instrument. Prerequisite If you don't know the basis of PIC ADC and LCD Interfacing please read the following...

May 20, 2012By Ligo GeorgeEmbedded, PIC Microcontroller, ProjectsEmbedded, Microcontroller, MikroC, PIC, Proteus292 CommentsRead more...

Analog to Digital Converter (ADC) in PIC Microcontroller

ADC module of PIC microcontroller have usually 5 input for 28 pin devices and 8 inputs for 40 pin devices. The conversion of analog signal to PIC ADC module results in corresponding 10 bit digital number. PIC ADC module has software selectable high and low voltage reference input to some combination of VDD, VSS, RA2 and RA3. In the following example project we will convert analog input to channel 1 to 10 bit digital number with low voltage reference (Vref-) 0v and high...

May 14, 2012By Ligo GeorgeMikroC, PIC Microcontroller, TutorialsADC, Microcontroller, PIC, Tutorials79 CommentsRead more...

Water Level Indicator and Controller using PIC Microcontroller

Here is a simple, versatile project which indicates the level of water and automatically controls it by using PIC Microcontroller. The Water Level Sensing Section senses the level of water in the tank and sends it (wireless) to the Receiver Section. Receiver Section is connected to the Controlling Section, which process the received information and produces visual, sound indications and controls the operation of the motor whenever required. The project is divide into 4 sections. 1. Power Supply Section Power Supply section provides required supply for Receiver...

May 11, 2012By Ligo GeorgeEmbedded, PIC Microcontroller, ProjectsMicrocontroller, MikroC, PIC, Projects, Proteus269 CommentsRead more...

LCD interfacing with PIC Microcontroller – MikroC

A PIC Microcontroller can be easily made to communicate with LCD by using the built in Libraries of MikroC. Interfacing between PIC and LCD can be 4-bit or 8-bit. The difference between 4-bit and 8-bit is how data are send to the LCD. In the 8-bit mode to write an 8-bit character to the LCD module, ASCII data is send through the data lines DB0- DB7 and data strobe is given through the E line. But 4-bit mode uses only 4 data lines. In this mode the...

May 9, 2012By Ligo GeorgeMikroC, PIC Microcontroller, TutorialsLCD, Microcontroller, PIC85 CommentsRead more...

Tag - PIC